Motorcycle M8 Mount with Tough Waterproof Hard Case for Samsung Galaxy S2

Overview

UltimateAddons M8 Screw attachment with a 3 prong adapter plate and UltimateAddons Tough Waterproof Case for Samsung Galaxy S2 allows users to mount one of the three various M8 screw sizes to suit their motorcycle. This UltimateAddons attachment is designed to replace one of the existing handlebar clamp bolts to allow a range of devices to be attached to a motorcycle.

1 - UltimateAddons Tough Waterproof Case for Samsung Galaxy S2

The outer shell of this case is made with a Hard Wearing Plastic. The inside has a customised rubber waterproof insert with cut outs for all major phone functions.

At the top there is access to the headphone socket with a rubber cap to cover socket while not in use. To the right there is an on/off switch button. To the right there are the volume buttons and to the base there is access to the charging port for Ultimate Addons Hard Wire Charging Cable which is available to buy in our shop. Please note that a standard micro usb cable may not fit inside this case.

On the rear there is are transparent cut outs for the camera and speaker functions. Ideal for using the Samsung Galaxy S2's 8 Megapixel camera, take photo's or videos while phone is still in this case.

The case locks with 2 clips at the bottom of the case, giving the case a water-right lock around the Samsung Galaxy S2.

The touch screen of the Samsung Galaxy S2 is still useable through the case.

Please note that this product should not be submerged in water, it has been designed to protect your Samsung Galaxy S2 from weather conditions while using it outdoors.

2 - Motorcycle Handlebar M8 Screw Bolt Attachment with 1

This kit is simple to install with a allen key. Simply choose the best fitting Longest M8 Threaded Screw Bolt. Remove the M8 screw from the motorcycle, place the 1" (25mm) ball connector in the hole and then replace with the UltimateAddons M8 Screw Bolt. Tighten then ready for use!

This is supplied with 3 sizes of M8 Screw (55/60/65mm) & 1" / 25mm Ball connector.

3 - UltimateAddons 25mm (1inch) to 3 Prong Adapter Socket Plate

This socket plate is designed to allow UltimateAddons 3 Prong Dedicated Device holders and Case holders to be attached to it. The socket slots securely over the 1 inch (25mm) ball connector and is tightened with a nut for the optimum viewing position.

As this attachment is on the 1" / 25mm ball connector the plate can be rotated to be best view.

Features

• Ideal for use of mount on Motorcycle handlebars where space is limited
• Replaces one of the existing handlebar clamp bolts of the motorcycle (if M8 Size)
• Supplied with 3 sizes of M8 Screw (55/60/65mm)
• 1" Ball connector is compatible with various holders on the Market
• Includes 25mm Ball to 3 Prong Connector Plate
• Designed to keep the Samsung Galaxy S2 secure & waterproof
• Tough Hard case design has strong clips to lock phone inside case
• Touch screen can still be used while in case
• Internal dimensions of case designed specifically to fit the Samsung Galaxy S2
• Rubber insert helps reduce shock if dropped or bumped
• Designed to allow charger to fit inside the case (available early 2012)
• Case has a 3 prong mounting system on back of case allowing it to be mounted
• Case fits UltimateAddons mounting attachments, plenty to choose from!
• Use Touch Screen / Function Button while Samsung Galaxy S2 in case
• Access to Headphone / On/Off Switch & Volume Buttons
• Use its 8 Megapixel Camera while still in case, ideal for photo shots & video clips
• Listen to music through speaker while still in case
• Protect your Samsung Galaxy S2 while outdoors, ideal for work & outdoor pursuits
• Includes Lanyard to hold case around neck
• Designed to allow charger to fit inside the case, available to buy separately, see link below.
• Includes 1 x Free Screen Protector
• UltimateAddons Brand - Mix & Match Holders & Mounts to create your Perfect Mount!
• 12 Month Warranty

What's Included

1 x Hard Waterproof Case for Samsung Galaxy S2 including Lanyard
1 x UltimateAddons 3 Prong to 25mm / 1" Ball Socket Plate
1 x 1" (25mm) Ball Connector
1 x 55mm M8 Screw Bolt
1 x 60mm M8 Screw Bolt
1 x 65mm M8 Screw Bolt
1 x Free Screen Protector

Please ensure that you hear the case click when attaching to the 3 Prong Mount. If you do not hear a click then the case is not connected properly and may not be secure. It is very important to check this every time before use. You may need some force initially.

About UltimateAddons

We design in house to a high standard
30 day no quibble full money back Guarantee
12 months warranty
We control quality and production

Look For The Logo

We design and manufacture to high standards and are confident with all of our product ranges. We are confident that you will be 100% satisfied with your Ultimateaddons product, if however you are not we offer a 30 day money back guarantee. All our products carry 12 months return to base warranty if found to be defective.