Motorcycle M8 Bolt Mount with Tough Case for Apple iPhone 3Gs + Din Charger Cable

Overview

UltimateAddons Handlebar M8 Screw Ball attachment with UltimateAddons Tough Waterproof Case for Apple iPhone 3Gs and Din charger cable, allows users to mount their Apple iPhone 3Gs with one of the three various M8 screw sizes to suit their motorcycle. This UltimateAddons attachment is designed to replace one of the existing handlebar clamp bolts to allow a range of devices to be attached to a motorcycle.

This attachment with its 1" ball connector can be used with a range of other leading mount manufacturers and with UltimateAddons connector plates allowing you to mount device holders, waterproof cases and much more. The kit comes with 3 sizes of M8 size screw and a 1" (25mm) Ball Mount, allowing various other UltimateAddons holders to be attached. This type of mount is ideal for those who have limited space on their handlebars and the motorcycle has a M8 size threaded bolt which can be removed.

1 - Motorcycle Handlebar M8 Screw Attachment with 1 Inch Ball

This kit is simple to install with a allan key and supplied with 3 sizes of screws; 55/60/65mm. Simply choose the best fitting Longest M8 Screw. Remove the M8 screw from the motorcycle, place the 1" (25mm) ball connector in the hole and then replace with the UltimateAddons M8 Screw. Tighten then ready for use!

2 - UltimateAddons Waterproof Tough Case for Apple iPhone 3Gs

UltimateAddons Hard Waterproof Tough Case is designed to protect the Apple iPhone 3Gs from the elements. This robust waterproof case is ideal for anyone that wants to use the Apple iPhone 3Gs outdoors, at the beach, by the pool, on a boat, hillwalking, or any place where the Apple iPhone 3Gs is at risk of getting damaged by water. Not only is this a waterproof case but it has UltimateAddons 3 Prong Mounting System which allows it to be used along with most of the UltimateAddons Mounting attachments, making this a very versatile accessory for the Apple iPhone 3Gs.

Most main features of the Apple iPhone 3Gs can be used while in this case, including Touch screen can still be used while in case, Access to both Camera Lenses, Access to volume button, Access to On-Off Button, Access to function button, Cut out for light sensor, Earphone Access and its also designed to allow charger to fit inside the case, also keeping this connection watertight.

3 - UltimateAddons Hardwire Battery Cable with Apple iPhone 3Gs Connector Cable

The cable is simple to set up, the male din connector simply plugs into the female din socket if available on the motorcycle, then run the cable / switch box to a suitable location. The cable includes an inline blade fuse (easily replaced if required) with waterproof cover.

From there you can connect the suitable charge cable (Apple iPhone 3Gs connector included, various others are available to buy from our shop, see links below) and then connect it to the device. The cable is connected via a waterproof connector and is easy to remove.

Features

• Replaces one of the existing handlebar clamp bolts of the motorcycle (if M8 Size)
• Includes Tough Case Holder for Apple iPhone 3Gs
• Includes Hard Wire Din Charger Cable for Apple iPhone 3Gs
• Includes 25mm Ball to 3 Prong Connector Plate
• Ideal bespoke mount solution to keep the Apple iPhone 3Gs watertight
• Supplied with 3 sizes of M8 Screw (55/60/65mm)
• 1" Ball connector is compatible with various holders on the Market
• Ideal for use of mount on Motorcycle handlebars where space is limited
• Tough hard case design has 2 strong clips to protect Apple iPhone 3Gs while inside case
• Most main features can be used while Apple iPhone 4 is in case.
• Touch screen can still be used while in case
• Access to both Camera Lenses while in case
• Access to volume button
• Cut out for light sensor
• Earphone Access
• Also designed to allow charger to fit inside the case
• Silicone insert helps reduce shock if dropped or bumped
• Hard Wire cable is ideal for use with motorcycle battery; charge direct from power source 
• Input Voltage: DC 6-24V
• Maximum Charging Current: 1A
• Output Voltage: DC 5V
• Reverse Voltage Protection
• Short-Circuit Protection
• Overload Protection
• Water Resistance
• Built in Surge Protector
• On / Off Switch for easy access to disable when not in use
• Thin cable can easily be disguised if required
• Total Cable length - Approx 1.4 metres
• Connector to Switch box = approx 0.35 metres
• Switch box to Battery Connectors = approx 0.45 metres
• Optional Connector cables (not included) are 0.5 metre long
• On/Off Switch Box size - 6cm x 2.4cm x 3.9cm
• Tough Case for Apple iPhone 3Gs can fit all UltimateAddons mounting attachments
• M8 Mount can be used with UltimateAddons Dedicated Device Holders, Soft & Hard Waterproof Cases
• 12 Month Warranty
• UltimateAddons Brand
• Rated to IPX4

What's Included

• 1 x UltimateAddons Waterproof Tough Case for Apple iPhone 3Gs with Free Lanyard
• 1 x 1" / 25mm to 3 Prong Adapter Plate
• 1 x UltimateAddons Hard Wire Din Battery Charger Cable
• 1 x UltimateAddons Connector Cable for Apple iPhone 3Gs
• 1 x 1" / 25mm Ball Connector
• 1 x 55mm M8 Screw
• 1 x 60mm M8 Screw
• 1 x 65mm M8 Screw

About UltimateAddons

We design in house to a high standard
30 day no quibble full money back Guarantee
12 months warranty
We control quality and production

Look For The Logo

We design and manufacture to high standards and are confident with all of our product ranges. We are confident that you will be 100% satisfied with your Ultimateaddons product, if however you are not we offer a 30 day money back guarantee. All our products carry 12 months return to base warranty if found to be defective.

Will work with any Motorcycle that uses an M8 size threaded bolt which can be removed and replaced with the UltimateAddons M8 Screw Attachment & Ball.

Features

• Replaces one of the existing handlebar clamp bolts of the motorcycle (if M8 Size)
• Includes Tough Case Holder for Apple iPhone 3Gs
• Includes Hard Wire Din Charger Cable for Apple iPhone 3Gs
• Includes 25mm Ball to 3 Prong Connector Plate
• Ideal bespoke mount solution to keep the Apple iPhone 3Gs watertight
• Supplied with 3 sizes of M8 Screw (55/60/65mm)
• 1" Ball connector is compatible with various holders on the Market
• Ideal for use of mount on Motorcycle handlebars where space is limited
• Tough hard case design has 2 strong clips to protect Apple iPhone 3Gs while inside case
• Most main features can be used while Apple iPhone 4 is in case.
• Touch screen can still be used while in case
• Access to both Camera Lenses while in case
• Access to volume button
• Cut out for light sensor
• Earphone Access
• Also designed to allow charger to fit inside the case
• Silicone insert helps reduce shock if dropped or bumped
• Hard Wire cable is ideal for use with motorcycle battery; charge direct from power source 
• Input Voltage: DC 6-24V
• Maximum Charging Current: 1A
• Output Voltage: DC 5V
• Reverse Voltage Protection
• Short-Circuit Protection
• Overload Protection
• Water Resistance
• Built in Surge Protector
• On / Off Switch for easy access to disable when not in use
• Thin cable can easily be disguised if required
• Total Cable length - Approx 1.4 metres
• Connector to Switch box = approx 0.35 metres
• Switch box to Battery Connectors = approx 0.45 metres
• Optional Connector cables (not included) are 0.5 metre long
• On/Off Switch Box size - 6cm x 2.4cm x 3.9cm
• Tough Case for Apple iPhone 3Gs can fit all UltimateAddons mounting attachments
• M8 Mount can be used with UltimateAddons Dedicated Device Holders, Soft & Hard Waterproof Cases
• 12 Month Warranty
• UltimateAddons Brand